areasmediacorp

Hitachi CH 36DL Information The Hitachi CH 36DL is a cordless hedge trimmer that is powered by a 36V lithium-ion battery. It has a long, 620mm blade that is made of hardened steel and has three cutting edges for a clean, precise cut. The trimmer also has a variable speed control that allows you to adjust the cutting speed to suit the type of hedge you are trimming. Image of Hitachi CH 36DL hedge trimmer Specifications

Ferm MMM1005 Information The Ferm MMM1005 is a digital multimeter that is designed for both professional and hobby use. It is a versatile tool that can be used to measure a wide range of electrical values, including AC and DC voltage, current, resistance, capacitance, and frequency. The MMM1005 also features a number of additional functions, such as a diode test, continuity test, and transistor test. Image: Full specifications:

Black & Decker GTC1843L Information the information about the Black & Decker GTC1843L cordless pole hedge trimmer: Introduction The Black & Decker GTC1843L is a powerful and versatile cordless pole hedge trimmer that is perfect for trimming tall hedges. It has a 18V motor that delivers plenty of power, and it comes with an extra-long handle that allows you to reach up to 3.5 meters. The trimmer also features diamond ground, dual action blades that provide clean cuts and reduce vibration.

Hilti SB 4-A22 Information The Hilti SB 4-A22 is a cordless band saw that is designed for precision cutting of metal profiles, threaded rods, plastic pipes, metal pipes, and rebar. It is powered by a 22V lithium-ion battery and has a cutting capacity of up to 63.5mm (2 1/2"). The saw features a low-profile design for easier access to tight spaces, and it produces low noise and low debris, making it ideal for use in confined areas. The SB 4-A22 also has a glass-fiber reinforced casing that is up to four times more resistant to damage from dropping and twice as resistant to extreme temperatures than standard ABS plastic. Image: Specifications:

Panasonic EY78A1 Information Intro The Panasonic EY78A1 is a cordless rotary hammer drill and driver that offers a versatile range of features for a variety of applications. It is powered by a 18V Li-ion battery pack, which provides up to 65 minutes of runtime on a single charge. The drill has a dual function, allowing it to be used for both rotary hammer drilling and drill and driver applications. It has a 5-stage torque clutch plus drill position, which provides precise control over the amount of torque applied. The drill also features a soft start for smooth operation and a LED light for working in dark areas. Image

PCE Instruments PCE-TDS 100HS Information The PCE-TDS 100HS is a portable ultrasonic flow meter that is used to measure the flow velocity of liquids in metal, plastic, and rubber pipes and tubes with a diameter of 20 to 108 mm. The meter is non-invasive and unobstructed, making it ideal for use in a variety of applications, including industrial, commercial, and laboratory settings. Image Specifications

Milwaukee 9096-20 Information The Milwaukee 9096-20 is a 5/8" hex quick-change impact wrench that is designed for heavy-duty applications. It features a variable speed motor that delivers up to 315 ft-lbs of torque, and a 5/8" hex quick-change retention system for fast and secure attachment of sockets and accessories. The impact wrench also has an all-metal front housing for durability, and a bracket and ring for easy hoisting or carrying. Image: Specifications:

Makita HR2441 Information The Makita HR2441 is a 100-volt rotary hammer drill that is designed for a variety of applications, including drilling holes, chipping concrete, and masonry demolition. It features a powerful 780-watt motor that delivers up to 45,000 impacts per minute, and a variable speed trigger that allows for precise control over the drilling operation. The HR2441 also features a comfortable rubber grip that reduces vibration and fatigue, and a dust blower that helps to keep the work area clear. Image of Makita HR2441 rotary hammer drill Specifications

Makita DUC306 Information The Makita DUC306 is a 18Vx2 brushless top handle chainsaw with a 300mm (12") guide bar. It is powered by two 18V LXT® batteries, which provide a total of 36V of power. The DUC306 has a chain speed of 1,200m/min and can cut through branches up to 50cm in diameter. Image of Makita DUC306 chainsaw Specifications

Metabo WE 24-180 MVT Information The Metabo WE 24-180 MVT is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 2400 watt motor that can handle even the toughest jobs, and a variable speed trigger that allows you to control the speed of the grinder for precise results. The WE 24-180 MVT also features a comfortable grip and a dust extraction system that helps to keep your work area clean. Here are the full specifications of the Metabo WE 24-180 MVT: Specification Value Power 2400 watts No-load speed 8450 rpm Disc diameter 180 mm Weight 5.7 kg Cable length 4 m Here are some of the features of the Metabo WE 24-180 MVT:

DeWalt D51845 Information the information about the DeWalt D51845 framing nailer: Introduction The DeWalt D51845 is a powerful and versatile framing nailer that is perfect for a variety of construction projects. It is capable of driving 2-inch to 3-1/2-inch full round head nails, making it ideal for framing walls, subfloors, and roofs. The nailer features a lightweight magnesium construction that makes it easy to maneuver, and it has a comfortable grip that reduces fatigue. The D51845 also features a number of safety features, including a dry fire lockout and a jam clearing system.

DeWalt DW927 Information The DeWalt DW927 is a 12-volt cordless drill driver that was first released in 2003. It is a lightweight and compact tool that is well-suited for a variety of tasks, including light-duty drilling, driving screws, and small demolition work. Specifications

Metabo W 1150-125 Information The Metabo W 1150-125 is a powerful and versatile angle grinder that is ideal for a variety of tasks, including metal cutting, grinding, and polishing. It features a powerful 1150-watt motor that delivers up to 12,000 RPM, making it capable of cutting through even the toughest materials. The grinder is also equipped with a dust extraction system that helps to keep the work area clean and free of dust. Image of Metabo W 1150-125 angle grinder Specifications

Stiga SEV 2416 Q Information The Stiga SEV 2416 Q is a lightweight, 2400-watt electric chainsaw that is perfect for homeowners and light-duty commercial users. It has a 40 cm (16") guide bar and a 1.3 mm chain, making it ideal for cutting small trees, branches, and logs. The SEV 2416 Q also features a quick-release chain tensioner, an automatic chain oiler, and a low-vibration design. Image of Stiga SEV 2416 Q chainsaw Specifications

Poulan P4018WT Information The Poulan P4018WT is a 40cc 2-cycle gas chainsaw that is designed for homeowners and light-duty professionals. It has a 18-inch bar and chain, and it is powered by a SuperClean™ engine performance system that provides increased power, longer air filter life, and reduced fuel consumption. Image: Full specifications:

Alecto FPO-11 Information the information about the Alecto FPO-11: Intro The Alecto FPO-11 is a portable pulse oximeter that measures the oxygen saturation of your blood (SpO2) and your heart rate (PR). It is a small, lightweight device that can be easily clipped to your finger or earlobe. The FPO-11 is a great way to monitor your blood oxygen levels and heart rate at home or on the go.

Worx WG324.9 Information the information about the Worx WG324.9 cordless pruning saw: Intro The Worx WG324.9 is a lightweight and powerful cordless pruning saw that is perfect for homeowners and professionals who need to trim branches and limbs up to 12 cm (5 inches) thick. It is powered by a 20V PowerShare battery, which provides up to 45 minutes of run time on a single charge. The saw features a 5-inch guide bar and chain, which allows it to make precise cuts with minimal effort. It also has a built-in safety chain brake that stops the chain immediately when the trigger is released, preventing kickback and injury.

Güde GF 420-4.1 Information Intro The Güde GF 420-4.1 is a powerful and versatile gasoline-powered garden tiller that is perfect for preparing soil for planting, weeding, and aerating. It features a 4.1-horsepower 4-stroke engine that provides plenty of power for even the toughest jobs. The tiller has a working width of 420mm and a working depth of 175-350mm, making it ideal for a variety of tasks. The GF 420-4.1 also features a number of safety features, including a reverse gear, an oil level indicator, and a safety switch. Image

SHO-ME STR-530 Information Sho-Me STR-530 is a mid-range radar detector that offers a good balance of features and performance. It is capable of detecting radar signals in all major bands, including X, K, Ka, Ku, Ultra-X, and Ultra-K. It also has the ability to detect laser signals, making it a good choice for drivers who want to be protected from all types of speed traps. Introduction The Sho-Me STR-530 is a compact and stylish radar detector that is easy to use. It has a large, clear display that shows all of the important information, such as the type of radar signal being detected, the distance to the radar source, and the strength of the signal. The STR-530 also has a variety of features that can help you to avoid speeding tickets, such as:

Dolmar 120 si H Information The Dolmar 120 si H is a powerful and versatile chainsaw that is ideal for a variety of tasks, from felling trees to limbing and bucking. It features a 120cc, 2-stroke engine that delivers 3.0 horsepower, and a 16-inch bar and chain that can handle even the toughest jobs. The saw is also equipped with a number of features that make it easy to use and maintain, such as an automatic chain oiler, a quick-release chain tensioner, and an anti-vibration system. Specifications

Graphite 59G873 Information the information about Graphite 59G873: Intro The Graphite 59G873 is a powerful and versatile benchtop metal cutting saw. It is equipped with a 2600W motor that can deliver up to 3800 RPM, making it capable of cutting through a wide variety of materials, including steel, iron, aluminum, and copper. The saw also features a 355mm cutting wheel and a 0-45° adjustable cutting angle, giving you the flexibility to make precise cuts.

Cotech JS 18 Information Introduction The Cotech JS 18 is a powerful and versatile jigsaw that is perfect for a variety of woodworking projects. It features a powerful 18V motor that can handle even the toughest cuts, and a variable speed trigger that allows you to control the speed of the saw for different materials and applications. The JS 18 also has a number of other features that make it a great choice for woodworkers, including a pendulum action for smooth, accurate cuts, a dust collection port to keep your work area clean, and a built-in laser guide for making precise cuts. Image

Voltcraft VC-330 Information The Voltcraft VC-330 is an entry-level clamp meter that combines ergonomic design and excellent value for money. It features a non-contact current measurement function, as well as the usual multimeter functions such as voltage, resistance, capacitance, and frequency. The VC-330 is also CAT II 600 V and CAT III 300 V rated, making it safe to use on live circuits. Image of Voltcraft VC-330 Specifications

Bosch UniversalCirc 12 Information The Bosch UniversalCirc 12 is a cordless circular saw that is designed for making straight and angled cuts in wood and wood-based materials. It is part of the Bosch 12V POWER FOR ALL system, which means that it can use the same batteries as other tools in the system. Introduction The UniversalCirc 12 is a lightweight and compact saw that is easy to use. It has a comfortable grip and a variable speed trigger, so you can adjust the speed to the material you are cutting. The saw also has a built-in LED light that illuminates the cutting area, making it easier to see what you are doing.

Extech 45170 Information The Extech 45170 is a four-in-one environmental meter that measures humidity, temperature, air velocity, and light. It is a compact and portable device that is easy to use. The 45170 has a large dual LCD display that shows the current readings for all four measurements. The display is also backlit, so it can be easily read in low-light conditions. The 45170 has a built-in humidity sensor that provides accurate readings of relative humidity. The temperature sensor is also built-in, and it can measure temperatures from -10 to 50 degrees Celsius. The air velocity sensor uses a vane wheel to measure wind speed. The light sensor measures light intensity in lux. The 45170 has a number of features that make it a versatile environmental meter. The built-in Type K input allows you to connect a thermocouple probe to measure high temperatures. The 45170 also has a hold function that allows you to freeze the current readings on the display. The data hold function is useful...

Hager ECP300C Information The Hager ECP300C is a three-phase energy meter that complies with MID (Measurement Instruments Directive) requirements. It is a modular meter that can be installed in a DIN rail housing. The ECP300C has a current rating of 1-5A and a voltage rating of 230/400V. It measures active energy, reactive energy, apparent energy, and power factor. The meter also has a pulse output for remote monitoring. Image of Hager ECP300C Specifications

PowerPlus POWXQ5315 Information Introduction The PowerPlus POWXQ5315 is a 1800W circular saw that is designed for both professional and DIY use. It features a powerful motor that can make quick work of cutting through wood, plastic, and metal. The saw also has a number of safety features, including a dust extraction port, a work light, and a laser guide. Image

Worx WX424 Information Introduction The Worx WX424 is a compact and lightweight circular saw that is perfect for DIYers and homeowners who need a saw for small- to medium-sized projects. It is powered by a 310W motor that provides enough power for most cutting tasks, and it has a 76mm blade that can cut through a variety of materials, including wood, metal, plastic, and ceramic. The WX424 also features a laser guide that helps to ensure accurate cuts, and it has a soft grip handle that provides a comfortable and secure grip. Image